Table of Contents
Advertisement
Extinguishing Panel - USER MANUAL
Reset
To reset panel from an alarm condition, press Start/Stop Sounders, Silence Buzzer,
then Reset. If the panel enters the second stage alarm (while in automatic mode), the
panel cannot be reset until the reset inhibit timer has finished it`s countdown.
The panel can NOT be reset from a fault condition. All faults are non latching, so
when a fault clears from the panel it will be automatically cleared from the display.
Faults
The relevant LED will illuminate and the internal tone will sound.
Pressing the
"Silence buzzer" button, with the control key "ON", will silence the tone. If there are
any faults, call an Engineer.
PAGE 9
Approved Document No: GLT.MAN-132
Issue : 1.2
Author: NRPJ
Date: 06/10/2010
Advertisement
Table of Contents
