•
slang
•
slang-devel
Preparation before Setup
Be sure to read the following before system installation or setup.
To operate NEC ESMPRO Agent, each service must be installed appropriately and must be
operating.
1. Check necessary packages
The following packages are needed to use NEC ESMPRO Agent.
If there are any packages which are not installed, install them.
•
ucd-snmp
•
ucd-snmp-devel
•
ucd-snmp-utils
•
newt
•
newt-devel
•
portmap
•
slang
•
slang-devel
2. Environment settings of snmpd
Modify the environment setting file of snmpd (/etc/snmpd. conf) to set a community right to more
than "READ WRITE".
Correct the environment setting using vi command, etc., referring to the following.
For details of the settings, refer to the online help of snmpd.
Procedures after Completion of Installation 5-3