NEC Express5800 320Lb User Manual page 36

3-4 Installing Server
After fastening the main cabinet, open its front bezel to mount the CPU and PCI modules. For
details, see the following section "Installation of Rack-mount Model." Procedures are basically the
same for the tower model except that its modules are mounted vertically instead of horizontally.
IMPORTANT:
Follow the procedures below to install the CPU and PCI modules. Note
the followings before installing them.
Ensure the main cabinet is immobilized.
Place removed modules to the side of the main cabinet. Do not place modules on top of
the main cabinet.
Be sure to hold the modules tightly, and then mount them slowly and carefully.
If you cannot install modules smoothly, remove them and try again.
Install the CPU modules in the right two slots, the PCI modules in the left two slots.
Perform installation from the left slots.