Step C-3: Connect And Configure Options; Step C-4: Create Volume; Step C-5: Set Network For Nec Esmpro Agent - NEC Express5800 320Lb User Manual

Step C-3: Connect and Configure Options

When there are option PCI boards or peripheral devices to connect to the main unit, power off the
main unit. Then, for connecting them, follow the instructions in "PCI board" in the separate volume
of the User's Guide and the manual of the devices.
TIPS:
If LAN cards or disks are added, you need to set dual configurations. For details, see
"Step C-1: Set Dual LAN Card Configuration" (page 4-10) and "Step C-4: Create Volume"
(page4-19).

Step C-4: Create Volume

If you create a new volume on the expanded internal disk, see "System Upgrade" in the separate
volume of the User's Guide and configure RAID.

Step C-5: Set Network for NEC ESMPRO Agent

NEC ESMPRO Agent is required for continuous operation of the NEC Express5800/ft series, and it
is preinstalled. Also, it will be installed automatically when reinstalling the OS by using Linux for
NEC Express5800/ft series Back Up CD-ROM.
To run NEC ESMPRO Agent, you need to make settings of the SNMP. For details and methods of
the settings, see from "2. Environment settings of snmpd" to "5. Setting firewall" on "NEC
ESMPRO Agent" of "Installing Management Utility".
Linux Setup 4-19