Ultralux Pedestals; Installing The Ultralux On The Pedestal Mount - Planar UltraLux Series Installation Manual

Hide thumbs Also See for UltraLux Series:

Table of Contents

UltraLux Pedestals

The following picture shows examples of the 70" and 80" UltraLux pedestals.

The pedestal mount comes fully assembled, single or double-sided, depending on

your configuration. If you have ordered a single-sided pedestal mount, a back panel

will also be installed.

Caution: When installing the pedestal mount, you must ensure that it is attached to a

structure that safely supports UltraLux display.

Note:

You must provide your own anchoring hardware to secure the pedestal mount.

Find the location on the floor where you will install the pedestal mount.

Remove both bottom trim pieces, which gives you access to the anchor points.

Find the set anchor points on the bottom of the pedestal (See "70" UltraLux

Pedestal - Anchor Dimensions" on page 89 and "80" UltraLux Pedestal - Anchor

Dimensions" on page 92.)

Depending on the surface to which you are anchoring, install the appropriate

hardware to secure the pedestal mount.

Planar UltraLux Series Installation Guide

Table of Contents