Planar UltraLux Series Installation Manual page 59

Software Setup
This page allows you to upload the latest UltraLux Remote Monitoring software. You
can also reset all of your settings to the factory defaults, as well as choose the web
page link that is associated with the Planar logo in the top right corner of the page.
Click the Choose File button to locate the latest UltraLux software that you
1
downloaded from Planar's website.
Note: Make sure the software is downloaded to a local drive.
Click the Load Software button to load the new software. This process can take a
2
few minutes, depending on the speed of the network update. It is very
important that you do not interrupt the load process once it begins.
If you want to reset ALL settings to the factory default, click the Reset ALL to
3
Factory Default button. This includes network settings, date and time, etc., as
well as display settings.
Caution: Using this option will reset all of your configurations and reboot the remote
monitor. Because this includes network settings, be aware that the UltraLux Remote
Monitoring software may not configure to the same network address after the system
reboots.
Planar UltraLux Series Installation Guide
Planar UltraLux Remote Monitoring
53