Planar UltraLux Series Installation Manual page 31

To install the lower wall mount (kickstand), hold it in place using the centering
8
hole and a 1/4" lag screw (use the lower alignment hole that was marked in
step .
3
Centering hole
Install the remaining lag screws - four are recommended - with two on each side.
9
Prepare the lower mount (kickstand) for installing the display.
10
Loosen the captive screw so the latch can rotate.
11
Planar UltraLux Series Installation Guide
Installing an LCD Module on a Wall Using Planar Profile Mount
Loosen captive. Latch
25