Touchscreen Setup; Usb And Power Hook-Up - Planar UltraLux Series Manual

Touchscreen Setup

USB and Power Hook-Up

1
2
Note:
3
4
Note:
Using the display service kickstand, swing out the display. If you are only using
the mount, make sure you have at least 1" clearance to connect the USB and
power.
Plug in the 5V, 4A Power supply connector to the touchscreen power connector.
USB and Power connection to the touchscreen.
Connect the 5V line cord to the power adapter.
Plug one end of the USB cable to the USB connector on the touchscreen and the
other end to the PC.
USB and Power connection to the touchscreen.
Planar UltraLux Series Installation Guide
Power
USB
USB and Power Hook-Up
25