Installing Cables; Ac Power Cord; Ir Sensor Extender - Planar UltraLux Series Manual

AC power cord

Installing Cables

The two cables included with the UltraLux are the AC power cord and the IR sensor
extender.
AC power cord
The AC cord is installed into the back of the control module. Depending on your
setup, you may need additional cables for media player integration, as well as for
sending RS232 commands.

IR sensor extender

In order for the remote control to work, you need to connect the wired IR module to
the display, also on the bottom of the I/O panel. Then place the IR receiver in the
desired place on or near the display.
24 Planar UltraLux Series Installation Guide