First Setup - Planar PXN2490MW User Manual

First Setup

Install the Stand Base
1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the
LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the
screen will be set.
2. Insert Base into the monitor as shown below.
3. Stand the LED LCD Monitor up
Disconnecting the Stand Base
Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the
1.
LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the
screen will be set.
Press the tenons inward and pull the base from stand to remove.
2.
6