100
2-7 Configuration Wizard
Use this wizard to configure RAID using the HDD‟s connected to the disk array controller. For the detailed
explanation of this feature, see "Configuring Virtual Disk" described later.
2-8 Adapter Selection
If several disk array controllers are installed in the server, you need to select the adapters in WebBIOS to
configure each one. Clicking [Adapter Selection] in the WebBIOS top menu opens the [Adapter Selection]
screen again.
2-9 Physical View / Logical View
If a virtual disk has been configured using the disk array controller, DG (disk group) is displayed in the
WebBIOS top menu. Clicking [Physical View] displays information for the HDD‟s in a DG. Clicking [Logical
View] displays the virtual disk in a DG.
2-10 Events
The Events screen is used to confirm the system events.
The disk array controller does not support the Events feature.
Notice