2-4 Scan Devices
When you click [Scan Devices] in the WebBIOS top menu, the HDD‟s connected to the disk array controller
are detected. Use this feature when you have installed a new HDD while the WebBIOS is running.
Notice
If the newly connected HDD contains different configuration information,
the [Foreign Configuration] screen as shown below appears. To use the
HDD as a new one, click [ClearForeignCfg] to clear the configuration
information on the HDD.
To use the configuration information stored on the HDD, click
"GuidPreview" to confirm the configuration information. To load the
configuration, click "Import" in the confirmation screen.
95