Healthrider H145t Treadmill Manual page 9

4. Slide the Adjustable Cushions (39) to firmness
setting 5 (only one side is shown).
Identify the Right Handrail (82) and the Right
Base Cover (84). Slide the Right Base Cover
onto the Right Handrail.
Hold a 3/8" x 1" Screw (4) on the end of a hex
key and insert the Screw into the Right Handrail
(82). Repeat this step with a second 3/8" x 1"
Screw (4).
Partially tighten the two 3/8" x 1" Screws (4)
into the Right Handrail (82) and the Base (94)
until the heads of the Screws touch the Right
Handrail; do not fully tighten the Screws yet.
Do not press the Right Base Cover (84) into
place yet.
Slide the Left Base Cover (not shown) onto
the Left Handrail (not shown). Attach the Left
Handrail to the Base (94) as described above.
5. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the screw (A). Then, lift
off the Crossbar (80).
4
39
5
80
9
84
94
82
4
Console
Assembly
A