Healthrider H145t Treadmill Manual page 13

12. Raise the Frame (60) to the position shown.
Have a second person hold the Frame until
step 13 is completed.
Orient the Storage Latch (61) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (61) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (10).
13. Attach the upper end of the Storage Latch (61)
to the bracket on the Frame (60) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (10).
Lower the Frame (60) (see HOW TO LOWER
THE TREADMILL FOR USE on page 23).
14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the  oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust
the walking belt (see pages 25 and 26).
12
94
Latch
Knob
61
13
10
13
60
60
10
3
Large
Barrel
60
6
61