Healthrider C550e Elliptical User Manual page 8

6. While another person holds the Console (4)
near the Upright (3), connect the console wire to
the Wire Harness (73). Insert the excess wire
downward into the Upright.
Tip: Avoid pinching the wires during this
step. Slide the Upright Cover (5) upward to the
top of the Upright (3). Attach the Console (4)
and the Upright Cover to the Upright with four
M4 x 19mm Screws (75).
7. Identify the Right Handlebar (36), which is
marked with a sticker. Orient the Right
Handlebar as shown; make sure that the
hexagonal holes are in the indicated loca-
tion.
Insert the Right Handlebar (36) into the Right
Upper Body Arm (37). Attach the Right
Handlebar with two M8 x 35mm Button Screws
(67) and two M8 Nylon Locknuts (68). Make
sure that the Nylon Locknuts are inside the
hexagonal holes.
Repeat this step for the Left Handlebar (22).
6
Console
Wire
Avoid pinching the
Wire Harness (73)
during this step
7
22
8
4
73
3
5
75
36
68
Hexagonal
Holes
67
37