Hardware Installation - SIIG 1-Port ECP Quick Installation Manual

High-speed parallel card
Table of Contents

Advertisement

Hardware Installation

General instructions for installing the card are
provided below. Since the design of computer
cases and motherboards vary, refer to your
computer's reference manual for further
information, if needed.
Static Electricity Discharge may permanently
damage your system. Discharge any static
electricity build up in your body by touching your
computer's case for a few seconds. Avoid any
contact with internal parts and handle cards
only by their external edges.
Note: for low profile chassis, remove the
standard height bracket and install the
enhanced low-profile bracket now.
1.
Turn OFF the power to your computer and
any other connected peripheral devices.
2.
Unplug the power cord from the computer.
3.
Remove the computer cover.
4.
Remove the slot bracket from an available
PCI Express slot.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

1-port eppDp 1-port ecp/epp parallel pcie

Table of Contents