Tools For Assembly; Service And Technical Support; Tools Required - Schwinn 12in Tiger Owner's Manual

TOOLS FOR ASSEMBLY

Your new bicycle was assembled and tuned in the factory and then partially disassembled for shipping. You may have purchased the bicycle
already fully assembled and ready to ride OR in the shipping carton in the partially disassembled form. The following instructions will
enable you to prepare your bicycle for years of enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment
of any area please refer to the relevant sections in this manual. If you have questions about your ability to properly assemble this unit,
please consult a qualified specialist before riding. If you need replacement parts or have questions pertaining to the assembly of your
bicycle, call the service line direct at:
SERVICE & TECHNICAL SUPPORT
To avoid injury, this product must be properly assembled before use. If your bicycle was obtained assembled, we strongly
recommend that you review the complete assembly instructions and perform checks specified in this manual before riding.
We recommend that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to properly
assembly, repair, or maintain your bicycle.
CALL TOLL FREE 1-800-THE-BIKE

Tools Required:

• Phillips head screw driver
• 4mm, 5mm, 6mm and 8mm Allen keys
• Adjustable wrench or a 9mm, 10mm, 14mm and 15mm open and box end wrenches
• A pair of pliers with cable cutting ability
©2010
27