Assembly; Tools Required - Schwinn S-14 Cruiser Owner's Manual

3 Assembly

Assembly
❸
WARNING! WARNING!
• Improper assembly of this product may result in serious
injury or death. Always follow the instructions in this
manual and check critical components (e.g. wheels, seat,
pedals, brakes, derailleurs, tires) before each use.
• We recommend that you consult a bicycle specialist if you
have doubts or concerns as to your experience or ability to
properly assemble, repair, or maintain your bicycle. If your
bicycle was obtained assembled, we recommend that you
read these instructions and perform checks specified in
this manual before riding.
Your new bicycle was assembled and tuned in the factory and
then partially disassembled for shipping. You may have
purchased the bicycle already fully assembled and ready to ride
or in the shipping carton in the partially disassembled form.
The following instructions will enable you to prepare your
bicycle for years of enjoyable cycling.
For more details on inspection, lubrication, maintenance and
adjustment of any area please refer to the relevant sections in
this manual. If you have questions about your ability to
properly assemble this unit, please consult a qualified specialist
before riding.
16
If you need replacement parts or have questions pertaining to
the assembly of your bicycle, call the service line direct at:
1-800-626-2811. Monday - Friday 8:00 am to 5:00 pm Central
Standard Time (CST).

TOOLS REQUIRED

• Phillips head screw driver
• 4 mm, 5 mm, 6 mm and 8 mm Allen wrench
• Adjustable wrench or a 9 mm, 10 mm, 14 mm and 15 mm
open and box end wrenches
• A pair of pliers with cable cutting ability
Figure 3.1