Table Of Zones - Clifford Concept 650MkII Owner's Manual

G919730P_01-07.qxd 1/12/07

table of zones

The zone number is the number of LED flashes used by the system to
identify a specific input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or switches
you have had installed. If the Warning Zone response is triggered, the
LED will not report it.
Zone - Number
of LED Flashes
1
2
3
4
5
6
7
8
9
10
anti-code grabbing (ACG)
This unit features Anti-Code Grabbing (ACG) with Random Code
Encryption. This means the receiver and transmitters each use a math-
ematical formula called an algorithm to change their code each time
the transmitter is used. This technology has been developed to increase
the security of the unit. The control unit knows what the next codes
should be.
* This feature is not evaluated by Thatcham
© 2 0 0 7 d i re c t e d e l e c t ro n i c s
3:39 PM Page 17
Dealer-Installed
Description Options
Optional Proximity sensor
Optional Omnisensor
Optional Tilt sensor
Door switch trigger
Instant trigger - boot
Instant trigger - bonnet or
closed circuit input
Ignition trigger
Optional Glass Tamper or Ultrasonic sensor
BlackJax* activation
Power interrupt
17