Wiring Connection Diagram; Installation - Pyle PLR38I Instruction Manual

8&9.TUNE/SEEK & I<< and >>I (Skip back/skip forward, fast back/fast forward)
In radio mode, Press this button briefly to step up or down the radio dial in single step
increments. Press and hold for a second to enter SEEK mode.
In this mode the tuner will stop at the next strong station available.
In MP3/SD/MMC mode, press those buttons to skip back or ahead one track.
Press and hold for fast back or fast forward.
10.SOURCE (Input select, same as MODE on head unit)
Press the button repeatedly to cycle through the 5 audio input sources in order to select
either USB or SD modes.

Wiring connection diagram

Installation

mounting case
Figure 1 Bending the support tabs
Figure 3 Insert levers until "click"occurs, then use levels to pull out head unit.
PDF created with FinePrint pdfFactory trial version
-
-
support screw
head unit
0.5A FUSE
RED (ACC.12 volts)
BLACK (GROUND)
10A FUSE
YELLOW (CONSTANT 12 volts)
-
-
5m m n ut
5x15 mm
supp ort screw
Figure 2 Forming the support bracket
http://www.pdffactory.com
da sh boa rd at tach ment
surfa ce
supp ort strap
supp ort screw