The following table describes the labels in this screen.
Table 19 Static Trunk
LABEL
Group State
Member
Ports
Select All
Deselect All
Apply
Refresh
Group ID
State
Member
Ports
13.5 LACP
Click Advanced Settings > Link Aggregation > LACP to display the following
screen. See
aggregation.
Figure 42 LACP
GS1510 Series User's Guide
DESCRIPTION
Select the group ID to use for this trunk group, that is, one logical link
containing multiple ports.
Select Enable to use this static trunk group.
Select the ports to be added to the static trunk group.
Click this to select all ports as members of the static trunk group.
Click this to deselect all ports as members of the trunk gorup.
Click Apply to save your changes to the Switch.
Click Refresh to begin configuring this screen afresh.
This field displays the group ID to identify a trunk group, that is, one logical
link containing multiple ports.
This field displays if the trunk group is enabled or disabled.
This field displays the assigned ports that comprise the static trunk group.
Section 13.3.1 on page 77
Chapter 13 Link Aggregation
for more information on dynamic link
79