Customization - ZyXEL Communications GS1510-16 User Manual

Chapter 20 Web Authentication
The following table describes the labels in this screen.
Table 38 Configuration
LABEL
State
Method
Radius Server
IP
UDP Port
Shared Key
User Name
User Password
All Port State
Port
State
Status
Apply
Refresh

20.5 Customization

Use this screen to customize the appearance of the web login page that users will
see before accessing the Internet.
126
DESCRIPTION
Select Enable to use the web authentication feature.
Select whether to use Local or RADIUS as the authentication method.
The Local method of authentication uses the user and guest user groups
of the user account database on the Switch to authenticate. However,
only a certain number of accounts can exist at one time.
RADIUS is a security protocol used to authenticate users by means of
an external server instead of an internal device user database that is
limited to the memory capacity of the device. In essence, RADIUS allows
you to validate an unlimited number of users from a central location.
When RADIUS is selected as the authentication method, this Radius
Server will be used for all web authentication attempts.
Enter the IP address of an external RADIUS server in dotted decimal
notation.
Enter the UDP port of the RADIUS server. The default port of a RADIUS
server for authentication is 1812.
Specify a password (up to 32 alphanumeric characters) as the key to be
shared between the external RADIUS server and the Switch. This key is
not sent over the network. This key must be the same on the external
RADIUS server and the Switch.
Specify a username for the main guest account. This will only be used
when the Local method of authentication has been selected.
Specify a password for the main guest account. This will only be used
when the Local method of authentication has been selected.
Use this to Enable or Disable web authentication globally across all
ports.
This field displays the port number.
Use this to Enable or Disable web authentication on a specific port.
This field displays the current web authentication status of a specific
port.
Click this to save any changes.
Click this to reload the screen and reset any changes that were just
made.
GS1510 Series User's Guide