IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING - To reduce the risk of fire, electric shock, or injury: 1. Do not leave vacuum cleaner when plugged in. Unplug from outlet when not using and before servicing. 2.
Page 4
PREVENTION Switch off the vacuum cleaner immediately if the air intakes, the floor brushes or the telescopes tube becomes blocked. Before starting the vacuum cleaner up again remove the substance causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes.
Page 5
PREPARING THE VACUUM CLEANER 1. Fit the hose on the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out.
Page 6
Vacuum cleaning 1. Before using the device first roll out a sufficient length of electric cable and plug into the mains socket. The yellow mark on the electric cable is the maximum length that must not be exceeded. To switch on the device press the foot pedal button on the casing with your foot 2.
Cleaning the motor filter 1. Turn off and unplug cleaner. 2. Remove the dust container. 3. Release the filter cover and remove it. 4. Hold the protective motor filter together with the holder over a dustbin. Only then should you separate both parts from each other.
Environmental tips Once any electronic product is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority. In most cases you can take such products to your local recycling station. - 8 -...
Need help?
Do you have a question about the KAVAC20TRBA and is the answer not in the manual?
Questions and answers