Registering The Printer To Lpr Utility Or Deleting The Printer From There; Registering Lpr Printer; Setting Lpr Printer's Ip Address - Oki OKIPAGE 12i User Manual

10 base-t ethernet network adapter card

Hide thumbs Also See for OKIPAGE 12i:

Table of Contents

5 Select "UTILITY Deletion" and click "Next" button to execute

UNINSTALL.

Caution: Immediately after the Utility is deleted, the folder where LPR

Utility is installed and the spool folder remain visible on the

Explore, but they will disappear when you execute "Refresh" in

"View" menu of the Explore.

5.2.6 Registering the printer to LPR Utility or deleting the printer

from there

You will register the printer to be used in LPR UTILITY. If you register the

printer to LPR Utility, the output destination of the printer driver that has

been registered will be set in the spool directory created at the time of

LPR Utility Installation.

1 Double-click "Oki LPR UTILITY" icon on the "Oki LPR UTILITY"

window.

2 Select "ADD PRINTER..." in the "REMOTE PRINT" menu on the

"Oki LPR UTILITY" window.

3 Select the printer driver "OKIPAGE 12i" from "PRINTER:", and

enter the IP address of the printer in "IP ADDR:".

4 Click "OK" button, and "OKIPAGE 12i" will be added to "Oki LPR

UTILITY" main window. You can add other printer drivers using

the steps from 1 through 4.

5 Open the Printer folder in the Control Panel of Windows 95, and

open the Properties of the printer driver you registered in "ADD

PRINTER...". If "C:¥MLSPOOL¥MLLPR00 (unknown local port)"

is displayed for "Print to the following port:" of the "Details" win-

dow, the printer registration was performed correctly. (Directory

of the port to print to varies with the directory specified at Install.)

Caution: You can register up to 10 printers in the LPR Utility.

After completing registering the printer driver, set the LPR printer's IP

Address.

5. INSTALLING UTILITY

Table of Contents

Troubleshooting