Using Okipage 12I In The Netware 3.1X Environment - Oki OKIPAGE 12i User Manual

3. NETWORK SET UP FOR EACH OPERATION SYSTEM
3 In the text box "Network path or print queue", click "Browse" button
and select the printer to connect from the "printer" list.
4 For installing the printer driver, click the "Use disk..." button and
insert the Install disk in the disk drive which comes with the printer.
3. Setting up a printer
1 Open the shortcut of "Printers" from the Control Panel by double-
clicking it.
2 Select the OKIPAGE 12i printer that has been added newly, select
"Set Default Printer" in the "File" menu.
3 Once again, select the OKIPAGE 12i printer, and open the
"Properties" from the "File" menu.
4 Confirm that the "Print to port:" of the "Details" is set to the network
printer of your choice.
5 If the network printer of your choice is not set to the network
printer, select one from the "Print to port:" list.
6 If you cannot find it in the list, click "Add port..." button, and click
"Browse" from the "Add port" screen to select.

3.3.1.2 Using OKIPAGE 12i in the NetWare 3.1x environment

1. Setting the Control Panel
1 Double-click the "Network" icon from the Control Panel.
2 Make sure that the following items are in the configuration of the
" Network setup". If not, click the "Add..." button to add them.
• NetWare Network Client
• IPX /SPX Compatible Protocol
3 From the "Current network configuration:" list, select "IPX/SPX
Compatible Protocol" and open the Properties.
4 Check the "NetWare network client" check box in "Bind" of the
29