Fax Id - Oki OKIFAX 5780 User Manual

Note: Entering of invalid data (for example, the wrong date format was
used) will render the ENTER key ineffective.

Fax ID

The machine will use the information input under this function to identify
itself during communications. In most countries the programming of this
information into the machine before use is a legal requirement. In certain
countries this information must be set by the installation engineer and is
not user adjustable. In such cases the adjustments described here may not
appear in the standard menu.
TSI/CSI: The telephone number assigned to this machine. It will be
printed on the top of faxes sent and appear on the displays and reports of
other fax machines communicated with. A TSI/CSI can be up to 20 char-
acters long. Speed access No. 01.
TSI/CSI Option: This registers the telephone number for the second line
and is disabled when this G3 option is not installed. The same limitations
as TSI/CSI apply. Speed access No. 02.
Sender ID: A descriptive title (usually the machine location or name of
company or office). This information will be printed at the top of every
fax sent. Up to 32 characters can be entered; the first 16 characters of the
Sender ID are also assigned as Personal ID, which may appear on the
displays or reports of other fax machines communicated with. Speed
access No. 03.
1. Press MENU/EXIT to enter the menu.
2. Enter the speed access number 01 (TSI/CSI) and wait for the TSI/
CSI prompt message to appear.
3. Enter up to 20 numbers and characters (0-9/Hyphen/Space/+), press
ENTER.
4. Press
5. Enter up to 32 numbers and characters (0-9/*/#/a-z/A-Z/Pause/
Hyphen/Space/+), press ENTER.
6. Press MENU/EXIT to return to standby mode.
Note 1: Sender ID can also be accessed from the main menu by entering
its speed access code 03.)
Note 2: TSI/CSI Option is displayed when the G3 option board is
installed.
30
to select Sender ID and then press ENTER or .