Table of Contents
Advertisement
Magnum DS8016 Dual-Speed Stackable Hubs
1.2
Ordering Information
Magnum DS8016 Dual-Speed Stackable Hubs
Magnum DS8016-A:
auto-sensing for 100Mb or 10Mb operation. Stackable up to three units high,
with all ports in one stack operating as two separate traffic domains, one domain
at 100Mb/s and one domain at 10Mb/s. Includes stacking cable, internal auto-
ranging power-supply, cooling fan, and metal brackets for shelf or wall
mounting.
Magnum DS8016-B:
module that bridges the two traffic domains, filtering and selectively forwarding
packets between the 100Mb and the 10Mb domains. Stacks up to two DS8016-
A units. One DS8016-B unit stack supports all ports at 100Mb or 10Mb
communicating with each other. The internal switch has 2Mb dynamic store-
and-forward packet buffers and 8K node addresses.
Magnum DS8016-E:
only(not dual speed-speed). Each port will auto-negotiate with an attached
10/100device for 100Mbps speed and half-duplex mode only. May be used in
DS8016 stacks, same as Model DS8016-A.
Magnum DS8016-R:
and all of the LEDs are on front panel. No stacking. Normally used with 48V
DC dual source power supply, mounted in telco racks.
RMB-23W: Set of two mounting brackets that extend a standard 19" DS8016 hub
for mounting in a 23" -wide telco rack, 1U high.
GarrettCom, Inc. reserves the right to change specifications, performance
characteristics and/or model offerings without notice.
www GarrettCom com
.
.
Dual-Speed 10/100 Stackable Hub with sixteen RJ-45ports, each
Same as Magnum DS8016-A but includes an internal switch
Same as Magnum DS8016-A but all ports operate at 100Mbps
Same as Magnum DS8016-B but with all ports on the rear side
3
Installation and User Guide (07/06)
Advertisement
Table of Contents
