Cisco Network Convergence System 6000 Series Unpacking, Moving, And Securing Manual page 14

Dolly Specifications
Figure 1-2
1
Side panel to be removed
2
Clip
Remove the front panel from the dolly crate. Swing open and lift off.
Step 3
Using the 3/8-inch ratchet wrench with 5/8-inch socket, remove the two holding bolts from each side at
Step 4
the base of the dolly pallet
With at least two people, one on each side of the dolly shipping crate, tilt the crate back and lift off the
Step 5
pallet (Figure
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
1-6
Chassis Dolly Shipping Container
3
(Figure 1-2).
1-3).
1
2
3
Location of shipping pallet holding bolts (two
bolts on each side)
Chapter 1
OL-29233-01