Twinax Graphics Avm Control Panel Option - Tally T6218 Maintenance Manual Supplement

Twinax Graphics AVM Control Panel Option

The Graphics AVM panel menu setup option only applies to the manner in which the Twinax
AVM command is handled within a Code V, PGL, or Hex Pass-Through graphics job. It can be
accessed as follows:
CONFIG Tx/Cx
Style 1 The print position moves forward, relative to the last text item or paper-
Style 2 The print position moves forward to the exact line number specified by the
NOTES:
A Tx/Cx Absolute Vertical Move (AVM) command moves the current print
position vertically (forward only) to a line number specified by the command
without changing the horizontal print position. When the line number is less than
the current line position the line is moved to the appropriate line position on the
next page. When the line number is greater than the number of lines in the page
(form length) an invalid range parameter errors occurs. Tally provides two
responses to the AVM command.
P/N 1149-084775
Graphics AVM
move command that preceded the AVM command. The new line position
is calculated by subtracting the height (in lines) of any graphic items
preceding the AVM, from the line number specified in the AVM
command. This style is intended for compatibility with printers that use
an external or non-integrated Twinax interface. This is the default setting.
AVM command. The presence or absence of graphic items preceding the
AVM does not affect the position of text and/or graphics following the
AVM.
Tally Printer Corp.
Style 1 / Style 2
Menu Operations
17