Checking The Lamp Life Status; Setting The Lamp Mode - Eiki DLP Projector EIP-5000 Owner's Manual

Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation Page
Example: "Options (2)" screen menu
Description of Lamp Timer (Life)
Lamp usage condition
Operated exclusively
while "Eco Mode" is
"ON".
Operated exclusively
while "Eco Mode" is
"OFF".
* This is a reference value and is not guaranteed.
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The table above indicates rough estimates in the
case of using only in each mode shown.
• The lamp life may vary depending on the usage
condition.
56
Remaining lamp life
100% 5%
Approx. Approx.
2,500 hours* 125 hours*
Approx. Approx.
2,000 hours* 100 hours*

Setting the Lamp Mode

This function allows you to select the usage of
the two lamps installed in the projector.
Menu operation Page
Example: "Options (2)" screen menu
Description of Lamp Mode
Selectable items
Both Lamps Both lamps are used for greater
brightness.
Lamp 1 Only The lamp 1 is used.
When the lamp 1 burns out, the lamp 2
automatically switches in use.
Lamp 2 Only The lamp 2 is used.
When the lamp 2 burns out, the lamp 1
automatically switches in use.
Both lamps are used alternately, one
Equal Use
by one, for certain periods.
58
Description
83