Edimax BR-6258nL User Manual page 40

Subnet Mask
802.1d Spanning Tree
DHCP Server
Lease Time
DHCP Client Start IP
DHCP Client End IP
Domain Name
You can also set the router to assign a static IP address to specified computers
or devices.
replace the default IP address 192.168.2.2.
Please input a subnet mask value for this
network.
If you wish to activate the 802.1d spanning tree
function, select "Enabled".
The device is active as a DHCP server for
wireless devices to connect to. All DHCP Server
related information will be displayed here.
Select a lease time for the DHCP leases here.
The DHCP client will be forced to obtain a new
IP address after the period expires.
You can select "Forever" if you are using this
broadband router with less than 30 computers.
Enter the start IP address for the DHCP server's
IP assignment.
Enter the end IP address for the DHCP server's
IP assignment.
You can input a domain name for your network
(optional).
Note: If you assigned a new IP address to
the router, please make a note and
remember it. If you forget this IP address,
you may not be able to connect to the
browser-based configuration interface in
the future. If so, try using the default
access key http://edimax.go.
Note: To reset the IP address back to its
default value of 192.168.8.1, press and hold
the Reset/WPS button on the router for 10
seconds. Be aware that doing so restores
all settings and passwords back to factory
defaults.
40