Edimax BR-6258n Manual

Edimax BR-6258n Manual

Nano router 150mbps wireless broadband router station infrastructure (ap client)
Hide thumbs Also See for BR-6258n:

Advertisement

EDIMAX COMPUTER INC.
Edimax BR-6258n Nano router
150Mbps Wireless Broadband Router
© 2011 Edimax Computer
3350 Scott Blvd., Building #15
Santa Clara, California 95054, USA
Phone 408-496-1105 • Fax 408-980-1630
www.edimax.us

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BR-6258n and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Edimax BR-6258n

  • Page 1 EDIMAX COMPUTER INC. Edimax BR-6258n Nano router 150Mbps Wireless Broadband Router © 2011 Edimax Computer 3350 Scott Blvd., Building #15 Santa Clara, California 95054, USA Phone 408-496-1105 • Fax 408-980-1630 www.edimax.us...
  • Page 2 2. You use Ethernet cable to connect your computer to LAN port (the Yellow port) of BR-6258n. 3. Keep the WAN port (the Blue port) of BR-6258n unplugged. 4. Power on BR-6258n router either by using its power adapter or by using its USB cable with a USB port of the computer.
  • Page 3 Fig. 1 Open web browser like Internet Explorer. In the address box, enter http://192.168.2.1 hit Enter. Enter the default username and password. Username: admin Password 1234 Get into the router’s configuration page. Fig. 2 Click on General Setup in the menu. Click on Wireless.
  • Page 4 If your wireless router has wireless encryption enabled, you need to use the same security password in the BR-6258n. If you are not sure about the encryption passphrase, you may need to check the setting in your wireless router Fig.
  • Page 5 Infrastructure can work fine even its IP address is not in the wireless network. However, you may want to assign a new IP to the BR-6258n which may help you trouble shoot and easily access the BR-6258n later. Click on Apply.
  • Page 6 Internet. If your Ethernet computer has Internet, you can connect other etherenet device like xBox to the LAN (Yellow port) of BR-6258n. The Station Infrastructure mode setup is completed. Sometimes in order for your computer get the IP address from your wireless router, you need to go into cmd prompt and type “ipconfig...

Table of Contents