Ii-5. Resetting The Travel Router - Edimax BR-6258nL User Manual

II-5. Resetting the Travel Router
In the event the travel router is not properly functioning, or you wish to reset
and remove all settings, you can reset the travel router to its factory default..
1. Make sure the device is powered (by plugging the USB connector to a
computer or a USB power adapter).
2. Hold the body of the device with your hand, then press and hold the
WPS/Reset button with the end of a paper clip or a pen nub for
approximately 10 seconds, until the blue LED indicator begins to flash.
When the LED begins to flash, you may release the button, and the device
will begin to reset to factory default settings.
3. The LED will first stay steadily lit for approximately 10 to 15 seconds. The
LED will then begin to flash rapidly for an additional 10 to 15 seconds, as
the device reinitializes. When the blue LED remains lit without flashing, the
device has completed its reset process, and is ready for further
configuration.
22