Iii-3-5. Qos - Edimax BR-6258nL User Manual

Config Mode
Configure via
Push Button
Configure by
Client PIN Code
III-3-5. QoS
Quality of service (QoS) is a function which allows you to allocate a certain
amount of bandwidth to specific computer. This can ensure that applications
which require guaranteed bandwidth e.g. video conference or network
telephone applications, are able to function properly and without interruption.
Conversely, you can also limit the maximum bandwidth available to a specific
computer or application.
Check the "Enable QoS" box to enable this function and then enter the desired
values.
There are "Registrar" and "Enrollee" modes
for the WPS connection. When "Registrar"
is enabled, the wireless clients will follow
the router's wireless settings for WPS
connections. When "Enrollee" mode is
enabled, the router will follow the wireless
settings of wireless client for WPS
connections.
Click "Start PBC" to start Push-Button style
WPS setup. This router will wait for WPS
requests from wireless clients for 2 minutes.
The green WPS LED on the router will blink
for 2 minutes while it waits for incoming
WPS requests.
Please input the PIN code of the wireless
client you wish to connect, and click the
"Start PIN" button. The green WPS LED on
the router will blink for 2 minutes while it
waits for incoming WPS requests.
Note: When using PBC-type WPS setup,
you must press the hardware or software
WPS button on the wireless client within
120 seconds of doing so on the router. If
you do not do so in time, you will need to
activate WPS on the router again.
54