Quick Installation: Iq Setup - Edimax BR-6258nL User Manual

II.

Quick Installation: iQ Setup

Your travel router can be up and running in a matter of minutes. Just follow
these instructions to run the travel router's built-in quick installation program,
known as "iQ Setup".
If you need to make more detailed configurations, you can refer to III.
Browser Based Configuration Interface.
Note: Before you use this travel router, please
make sure your computer is set to use a dynamic IP
address. This is a simple procedure, and step by
step instructions for how to do this, can be found in
IV-1. Appendix:
1. Remove the clear plastic wrapping from the device.
2. Insert the USB connector of the travel router into a USB port on your
computer, or into a USB power adapter.
The blue power LED will light up for 10 to 15 seconds. The LED will then begin
to flash rapidly for an additional 10 to 15 seconds, as the device initializes.
When the blue LED remains lit without flashing, the device has completed its
initialization.
3. Search nearby wireless connections for a network with an ID similar to
Edimax5fb728, as in the figure below. The last six characters will be
different for every individual travel router device, and will be based on the
MAC address of your router.
Configuring your IP
Computer
9
address.
or a USB power adapter