Led Status - Edimax BR-6258nL User Manual

b. Ethernet port: This port is used to connect to a wired Internet connection.
Note: Please do not connect this Ethernet port to
your computer's Ethernet port, it will not work.
This port should be connected to an access point or
xDSL/cable modem.
c. WPS/Reset button: Press this button for 2 seconds to activate WPS mode,
or 10 seconds to reset the device.
d. LED indicator: There are two visible LEDs underneath the device's casing,
one blue and one green.
I-3.

LED Status

LED
Power
WPS
Note: When the WPS LED is blinking, that means
WPS is in progress. Please do not press the WPS
button again until the light stops blinking.
Color LED Status Description
Blinking
Blue
Steady On
Off
Steady ON
Green
Blinking
Off
Rapid: Device is initializing
Slow: Device is resetting
Device is powered normally
Device is not powered
When a WPS connection has been
established, the LED will activate for
5 minutes
WPS is in progress
No power or no WPS in progress
6