Iii. Browser Based Configuration Interface - Edimax BR-6258nL User Manual

III. Browser Based Configuration Interface

Once you have set the travel router to its operating mode as detailed in II.
Quick Setup: iQ Setup, you can further configure the settings of the travel
router anytime using the browser based configuration interface.
Note: Before you use this travel router, please
make sure your computer is set to use a dynamic IP
address. This is a simple procedure, and step by
step instructions for how to do this, can be found in
Appendix.
To access the browser based configuration interface, ensure that your travel
router is still connected to your computer or power source via USB, and that
you are connected to its wireless network, as detailed in II. Quick Setup steps
2 and 3.
You can access the browser based configuration interface by entering
"http://edimax.go" into the URL bar of a web browser.
As an alternative, you can also enter the travel router's default IP
http://192.168.8.1 into the URL bar of a web browser. This information, along
with other useful factory default values, is displayed on the access key card
which is included in the box with your travel router:
23