Iii-3-6. Nat - Edimax BR-6258nL User Manual

Remote Port Range Set the port range that will activate this
Traffic Type
Protocol
Click "Save" to save the changes and return to the QoS page. Click "Reset" to
clear all fields on this page.
Click "APPLY" to make the changes take effect. The following message will
appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
III-3-6. NAT
Network Address Translation (NAT) is a function which allows multiple users in
a local network to share a single or multiple IP addresses. Click "Enable" or
QoS rule. If only one port is involved,
input a single number here (1 to 65535);
if multiple ports are involved, input
starting / ending port number in x-y
format (like 10-20).
If you're creating a QoS rule for a specific
type of traffic, you can select it from this
menu and you don't have to input port
range above.
Select the protocol type here (TCP or
UDP).
57