Kenmore Elite Oasis 110.7705 Series Use And Care Manual page 9

Optional exhaust installations
Venting systems come in many varieties. Select the type best for
your installation.
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Fire Hazard
Cover unused exhaust hole with the following kit:
8212503
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
This dryer can be converted to exhaust out the bottom. If you
prefer, you may contact your local dealer to have the dryer
converted. This dryer can also be exhausted from the rear to
either the right or left side. Optional kits for these exhaust
installations are needed. Refer to the manufacturer's instructions
for kit installation instructions.
B
A. Standard rear offset exhaust installation
B. Rear exhaust installation to left or right side
C D
c. Bottom exhaust installation
D. Over-the-top installation (also available with one
offset elbow)
NOTE: The following kits for alternate installations are available
for purchase. For further information, please call
1-800-4-MY-HOME ® (1-800-469-4663}.
• Rear exhaust installation to left or right side:
Part Number 8212504
• Bottom exhaust installation:
Part Number 8212503
• Over-the-Top installation:
Part Number 26-49900
Determine vent path
• Select the route that will provide the straightest and most
direct path outdoors.
• Plan the installation to use the fewest number of elbows and
turns.
• When using elbows or making turns, allow as much room as
possible.
• Bend vent gradually to avoid kinking.
• Use the fewest 90 ° turns possible.
Determine vent length and elbows needed for best
drying performance
• Use the following Vent system charts to determine type of
vent material and hood combinations acceptable to use.
NOTE: Do not use vent runs longer than those specified in
the Vent system chart. Exhaust systems longer than those
specified will:
• Shorten the life of the dryer.
• Reduce performance, resulting in longer drying times and
increased energy usage.
The Vent system charts provides venting requirements that will
help to achieve the best drying performance.
Vent system charts
NOTE: Bottom exhaust performance is equivalent to adding two
elbows. To determine maximum exhaust length, add two elbows
to the chart.
NOTE: Performance of rear exhaust to either side of the dryer is
equivalent to adding one elbow. To determine maximum exhaust
length, add one elbow to the chart.