Installing Add-In Cards - TYAN S5393 Manual

2.9 - Installing Add-In Cards

Before installing add-in cards, it's helpful to know if they are fully compatible with your
motherboard. For this reason, we've provided the diagrams below, showing the slots
that appear on your motherboard.
PCI-E X 16 S lot
PCI-E x16 slot
PCI-E x8 slot
PCI-E X 8 S lo t
PCI-X 64bit 133/100/66MHz slot
PCI-X 133 S lot
PCI 32-bit 33MHz slot
P CI-X Slot
Simply find the appropriate slot for your add-in card and insert the card firmly. Do not
force any add-in cards into any slots if they do not seat in place. It is better to try
another slot or return the faulty card rather than damaging both the motherboard and
the add-in card.
PCI IDESELs and IRQ Assignments
Slot IDSEL#
or Device
PCIX1 ESB2
(J25) PCIX_AD25
PCIX2 ESB2
(J28) PCIX_AD26
PCI (J20) ESB2
P_AD20
Onboard ESB2
XGI Z9S P_AD21
(U150)
YOU MUST ALWAYS unplug the power connector from the
NOTE motherboard before performing system hardware changes. Otherwise
you may damage the board and/or expansion device.
PIRQ 0 PIRO 1
(INT A) (INT B)
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N4 _N5
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N8 _N9
ESB2 ESB2
PCI_IRQ_ PCI_IRQ_
N_E N_F
ESB2
PCI_IRQ_
N_A
27
http://www.tyan.com
PIRO 2 IRQ 3
(INT C) (INT D)
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N6 _N7
ESB2 ESB2
PCIX_IRQ PCIX_IRQ
_N10 _N11
ESB2 ESB2
PCI_IRQ_ PCI_IRQ_
N_G N_H