TYAN S5393 Manual page 11

E50: CMOS Clear Jumper
3 1
Normal
(Default)
Use this jumper when you have forgotten your
system/setup password or need to clear the system BIOS
settings.
How to clear the CMOS data
- Power off system and disconnect the power supply
from the AC source
- Use jumper cap to close pin_2 and 3 for several
seconds to clear the CMOS
Replace the jumper cap to close pin_1 and pin_2
-
Reconnect the power supply to the AC source and
power on the system
11
http://www.tyan.com
E50