Tips On Installing P1103/P1103B In Chassis - TYAN P1103 Manual

2.3 - Tips on Installing P1103/P1103B in Chassis

Before installation, do the following:
Power down the system.
Remove the power cord from the wall socket.
Use industry standard anti-static equipment (such as gloves or wrist
strap) and/or an environment that prevents accidental electrostatic
discharge.
Familiarize yourself with the server, motherboard, and/or chassis
documentation.
Confirm that your operating system includes the latest updates and
hotfixes.
To install the add-on card, do the following:
A. Remove the chassis cover and, if necessary, set aside any screws for
later use.
B. Remove the add-on card slot cover.
If the case requires a screw, place
the screw aside for later use.
C. Position the add-on card in the slot
directly over the connector and
gently push down on both sides of
the card until it slides into the PCI
connector.
D. Secure the add-on card to
the chassis. If required, use
the screw that you previously
removed.
E. Replace the chassis cover.
Plug the power cord into the
wall socket and power up the
system.
11
http://www.tyan.com