In Case Of Problems - TYAN S5393 Manual

3.1.3 In Case of Problems

If you have trouble booting your computer after making and saving the changes with the
BIOS setup program, you can restart the computer by holding the power button down until
the computer shuts off (usually within 4 seconds); resetting by pressing CTRL-ALT-DEL;
or clearing the CMOS.
The best advice is to only alter settings that you thoroughly understand. In particular, do
not change settings in the Chipset section unless you are absolutely sure of what you are
doing. The Chipset defaults have been carefully chosen either by TYAN or your system
manufacturer for best performance and reliability. Even a seemingly small change to the
Chipset setup options may cause the system to become unstable or unusable.
3.1.4 Setup Variations
Not all systems have the same BIOS setup layout or options. While the basic look and
function of the BIOS setup remains more or less the same for most systems, the
appearance of your Setup screen may differ from the charts shown in this section. Each
system design and chipset combination requires a custom configuration. In addition, the
final appearance of the Setup program depends on the system designer. Your system
designer may decide that certain items should not be available for user configuration, and
remove them from the BIOS setup program.
NOTE: The following pages provide the details of BIOS menu. Please be noticed that the
BIOS menu are continually changing due to the BIOS updating. The BIOS menu provided
are the most updated ones when this manual is written. Please visit Tyan's website at
http://www.tyan.com for the information of BIOS updating.
32
http://www.tyan.com