System Memory; Extended Memory - TYAN S5393 Manual

Defines the floppy drive type NONE / 360K, 5.25 in / 1.2 M, 5.25 in / 720 K, 3.5 in / 1.44 M,
3.5 in / 2.88 M, 3.5 in

System Memory

This display allows you to change the amount of system memory present on the system.

Extended Memory

This displays/allows you to change the amount of extended memory present on the
system.
3.2.1 IDE Channel 0/1 Setup
Computer detects IDE drive type from drive C to drive F.
Press Enter on any of the Channel 0, Channel 1 options to view advanced details of the
corresponding drive. The system displays advanced details like the number of
heads/cylinders/sectors on the detected disk and the maximum storage capacity of the
disk.
Main Advanced
Type:
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help
↑↓
Esc Exit
← →
The system displays advanced details like the number of heads/cylinders/sectors on the
detected disk and the maximum storage capacity of the disk.
This option lets you set the following hard disk parameters:
Type
Selects the type of device connected to the system.
Auto / CD/DVD / Not Installed / ARMD
Multi-Sector Transfers
PhoenixBIOS Setup Utility
Security TPM State
[Auto]
[Disabled]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item -/+
Select Menu Enter
http://www.tyan.com
Power
Item Specific Help
User = your enter
parameters of hard-disk
drive installed at this
connection.
Auto = autotypes hard-
disk drive installed here.
1-39 = you select pre-
determined type of
hard-disk drive installed
here.
CD-ROM = a CD-ROM
drive is installed here.
ATAPI Removable =
removable disk drive is
installed here.
Change Values
Select
Sub-Menu
34
Boot Exit
F9 Setup Defaults
F10 Save and Exit