Console Redirection; Flow Control - TYAN S5393 Manual

3.3.13 Console Redirection

Main Advanced
Com Port Address
Band Rate
Console Type

Flow Control

Console Connection:
Continue C.R. after POST :
F1 Help
↑↓
Esc Exit
← →
Com Port Address
If enabled, it will use a port on the motherboard.
Disabled / On-board COM A / On-board COM B
Baud Rate
This feature is used to enable the specified baud rate.
19.2K / 300 / 1200 / 2400 / 9600 / 38.4K / 57.6K / 115.2K
Console Type
This feature is used to enable the specified console type.
VT100 / VT100.8bit / PC-ANSI, 7bit / PC ANSI / VT100+ / VT-UTF8 /
ASCII
Flow Control
This feature is used to enable the flow control.
None / XON/XOFF / CTS/RTS
Console Connection
This feature is used to indicate whether the console is connected directly to the system or
a modem is used to connect.
Direct / Via modem
Continue C.R. after POST
This feature is used to enable console redirection after OS has loaded.
Off / On
PhoenixBIOS Setup Utility
Security
Console Redirection
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
[Off]
Select Item -/+
Select Menu Enter
http://www.tyan.com
TPM State Power
Change Values
Select
Sub-Menu
52
Boot Exit
Item Specific Help
If enabled, it will Use a
port on the
motherboard.
F9 Setup Defaults
F10 Save and Exit