Parallel Ata; Serial Ata - TYAN S5393 Manual

3.3.6 ATA Controller
This screen contains the configuration of the ATA controller.
Main Advanced
Parellel ATA:

Serial ATA:

SATA Controller Mode Option:
SATA RAID Enable:
SATA AHCI Enabel:
F1 Help
↑↓
Esc Exit
← →

Parallel ATA

This feature is used to enable the PATA function.
Disabled / Enabled
Serial ATA
This feature is used to enable the SATA function.
Enabled / Disabled
SATA Controller Mode Option
This feature is used to select SATA controller mode. In "compatible mode", SATA and
PATA drives are auto-detected and placed in Legacy mode. In "Enhanced (non-AHCI)
mode", SATA and PATA drives are auto-detected and placed in Native IDE mode.
Compatible / Enhanced (non-AHCI)
SATA RAID Enable
This item allows you to enable the SATA RAID functionality.
Disabled / Enabled
SATA AHCI Enable
This item allows you to enable the SATA AHCI functionality.
Disabled / Enabled
If you do not want to install SATA AHCI driver, please set the SATA AHCI mode to
Disabled.
PhoenixBIOS Setup Utility
Security
ATA Controller
[Enabled]
[Enabled]
[Enhanced]
[Disabled]
[Disabled]
Select Item -/+
Select Menu Enter
http://www.tyan.com
TPM State Power
Change Values
Select
Sub-Menu
46
Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit