DigiDesign Digi 002 & Digi 002 Rack Basic Manual page 17

Recording MIDI on an Instrument Track
Pro Tools Instrument tracks provide both MIDI
and audio capabilities, so you can record MIDI
and monitor audio from software and hardware
instruments.
To create an Instrument track and configure it for
recording:
Choose Setup > MIDI > Input Devices and
1
make sure your input device is selected in the
MIDI Input Enable window, and click OK.
Choose Track > New and specify 1 Mono In-
1
strument Track, then click Create.
Creating a new Mono Instrument track
Select View > Mix Window > Instruments to
2
display the MIDI controls for the Instrument
track.
Showing the Instrument View in the Mix window
At the top of the Instrument track in the Mix
3
window, click the track's MIDI Input selector
and assign the device and channel to be re-
corded, or leave it set to All.
MIDI Input selector
MIDI Input selector in an Instrument track
Do one of the following, depending on the
4
type of instrument you are using:
• If you are using an instrument plug-in,
click an Insert selector and insert the plug-
in on the Instrument track. The track's
MIDI output is automatically assigned to
the instrument plug-in.
Inserting an instrument plug-in on an Instrument track
Digi 002 & Digi 002 Rack and MIDI
15