Creating An Audio Cd From A Pro Tools Session - DigiDesign Digi 002 & Digi 002 Rack Basic Manual

Creating an Audio CD from a Pro Tools Session

Pro Tools does not create audio CDs directly,
but you can create stereo audio files from your
Pro Tools sessions that can be used by most CD
burning software.
Bouncing Audio to Disk
Use the Pro Tools Bounce to Disk feature to
combine all your audible tracks into a single
"master" audio file. After the new audio file has
been bounced to disk, you can burn it to a CD.
If you are bouncing down audio from 24-bit res-
olution to 16-bit (CD resolution), you should
use a dither plug-in on the main output. (For de-
tails, see the Digi 002 and Digi 002 Rack Getting
Started Guide.)
To bounce audio to disk:
After you have finished recording and mixing
1
a session in Pro Tools, select the length of the
session in the timeline ruler (or on a track), plus
an additional amount of time to avoid cutting
off any reverb tails that might continue past the
end of the last region.
Audio session highlighted and ready to bounce
12
Digi 002 and Digi 002 Rack Basics Guide
Choose File > Bounce to > Disk.
2
Choosing Bounce to Disk from the File menu
In the Bounce Options dialog, choose Outputs
3
1–2 as the Bounce Source.
Choose BWF (.WAV) for the File Type.
4
Choose Stereo Interleaved for the Format.
5
Choose 16 for the Resolution and 44100 for
6
the Sample Rate.