Cooking On A Zone - Baumatic BHC310 30cm Instruction Manual

o A beep will sound each time a touch is registered.
o You should make sure that the touch controls are always clean
and dry and that there is no object, such as utensils or cloths,
covering them. Even a thin film of water may make the controls
difficult to operate.

Cooking on a zone

o After powering on the appliance a buzzer will sound once and all
the indicator lights will come on for 1 second and then go out.
This indicates that the hob has entered stand-by mode.
o Press the ON/OFF button (1) and all the
indicators will show "-".
o Place a suitable pan on the cooking zone
that you wish to use. Ensure that the
bottom of the pan and the surface of the
cooking zone are clean and dry.
o Touch the relevant cooking zone selection button
(3).
o Choose an appropriate power setting for the food
that you
regulation buttons (2). If you don't choose a
power level within 1 minute, the hob will
automatically switch off and you will need to
start again.
are cooking using the power
12