GE Monogram ZEK938 Owner's Manual page 25

How to set
the oven Jbr
roasting
when using
the probe
1
2
Insert the probe into the meat.
Plug the probe into the outlet in the o'_en.
Make sm'e it is pushed all the way in.
Close the oxen door,
3
4
Press the PROBE pad.
Press the nmnber pads to set the desired
internal fi)od or meat temperature. The
maximmn internal temperature fl)r the food
that you can set is 200°F.
5 Press the BAKE pad.
6 Press the nmnber pads to set the desired
o'_en teillpei'at rife.
7 Press the START pad.
77_,¢ displr 9' will flash !/tt_,¢ probe is inserted into
the 0uiM and you have not ,set a probe temperature
and pressed the START pad.
XYhen the oxen starts to heat, the word "I,0"
will be in the displa).
Alter the internal temperature of the
meat reaches 100°K the changin,, internal
temperatm'e will be shown in the display.
8 When the internal temperature of the meat
reaches the number you have set, the probe
and the oven ttlYn ott and the oven control
signals. To stop tile signal, press the
CLI?_R/OFF pad. Use hot pads to remove
the probe fl'om the tood. Do not use tongs
to pull on it--they might damage it.
To change the oxen temperature during the
Roast c}cle, press the BAKE pad and then the
nmnber pads to set the new temperature.
• If the probe is removed fl'om the fi)od betm'e
the final temperature is reached, a tone will
sotmd and the display will flash tmtil the
l)Fobe is FeIlloved tl"Olll
the
()veil,
• You can use the timer exert thou,*h xou
cannot rise timed oxen opei'ations.
@
(9@@@@@@@@@
@
@@@@@(9@@@@
@
@
25